How to configure the LAN settings?
Step 1 Open a web browser on your computer, input http://192.168.0.1 in the address bar.
Press “Enter” and you will login to the initial page, you don’t need type username and password when you set the router first time. The default password for W308R is null.
Step 2 Click “Advanced settings” on the top right of the web page, and then click “WAN settings” where you can configure WAN port.
Step 3 Click on LAN settings under the category of the Advanced settings.
The IP address is the address of your router’s LAN port address. It is also the address you type in the address bar in the web browser when you login to the router’s web management. And it is default as 192.168.0.1. You can change it if necessary.
For example, if I want to change the LAN address into 192.168.6.1.
1. Change the IP address. And click “OK” to save.
2. The router will reboot. Before it reboot the webpage will tell you if you’d like to reboot it.
Click on “OK” then you’ll see an image below. The router is rebooting now.
3. The network will disconnect after the router has rebooted and you should re-login on the webpage. You should input http://192.168.6.1 instead of http://192.168.0.1 in the address bar to login to the webpage management.
Maybe you can’t log on the webpage successfully. You need to notice if your IP address on your computer is manually setting or automatically setting. If you can’t get an IP correctly in the network of 192.168.6.0 then you need set it manually.
4. You can continue to configure your router now.