服务中心
How to choose wireless WAN(WISP) mode for the router

 

 

Q:Why do we choose the Wireless WAN(WISP) mode?

A:Sometimes we want the router to be a wireless repeater to the uplink wireless signal. You can achieve this through choose Wireless WAN for the router.

The conncetion structure  as follows:

Key points:

The LAN IP address should be in defferent network segment. For example, the uplink router has the LAN IP 192.168.10.1, then you can set the secondary router’s LAN IP as 192.168.0.1.

Steps are as below:

1.    login to the router’s homepage by typing http://192.168.0.1 in the address bar in web browser. Input “admin” for both user name and password.

2.    click Advanced settingsàWAN Medium, you’ll see a page as follows.

 

3,choose Wireless WAN and click Open Scan, you will find the uplink wireless router’s signal.

4,choose the Uplink router’s wireless signal and click OK.

5, the uplink wireless router’s SSID will add to the blank of SSID, then please choose the same Security Mode/encryption type with the uplink wireless router, and please input the uplink wireless router’s security key in the blank of Pass Phrase. Then click Apply to save the settings.

Note:

The router’s LAN ip should be in different IP network with uplink wireless router’s LAN IP.

For example:

Uplink wireless router’s LAN IP: 192.168.10.1

Router’s LAN IP: 192.168.0.1

 

All specifications are subject to change without prior notice.